Spray & Buff maintenance package

---

Our wood specialists often get asked after a restoration package is completed, "How do I keep my Floors looking like this?" So we designed a maintenance package for our existing clients. Any client that has used our services in up to a year qualifies for a Spray & Buff Cleaning . We recommend using this package every 6 months to a year depending on traffic and occupants living in the home. This package can also be used in certain instances for people who have recently had their floors installed and there is no visible damage, excessive soil or residues found on the surface. 

$1.00 Sq. Ft

Stairs $10.00 Per Step/Landing

1.  Inspect the wood floors to identify any existing problems or issues

2. Thoroughly vacuum all loose dirt, dust and debris from the floor.

3. Use our PH Neutral cleaner along with a buffing pad and our rotary machine to clean the surface of the floor. 

4. Finally we will then use our rotary machine along with a dry pad to polish/burnish

 the floors to their original shine and luster and bring back its natural protection and beauty!  

Package Details:

Our full refinishing package is for flooring that has damage that cannot be cleaned or covered up. Examples of this include, but are not limited to:

• Excessive Color loss or oxidation on the wood's surface.
• Fading over time due to high traffic or UV rays from the sun which can cause yellowing from certain oil based finishes.
• Pet stains that have seeped past the finish into the wood and discolored the area.
• Numerous deep scratches down to bare wood.
• Planks that have been warped or damaged from high humidity in the home which cause cupping or crowning.
• Water stains from large spills or leaks.

In a lot of cases, your floors can still be salvaged by our full refinishing process. Also this package is for clients who simply want to change the stain color because it doesn't match their style or theme in the home. 

To fully refinish your floors means to have the old polyurethane & stain removed, only leaving the bare wood planks. The top layer of wood is sanded several times using different grits to make sure it has a smooth, even texture. At this point in the process, you can choose which color best suits your needs or to leave it natural. Your wood specialist will advise you of the stain options. Timing of completion will depend on the size and scope of the job.  All furniture will need to be removed from the floors.  Many people elect to have a POD used to temporarily store the furniture while the floors are being refinished.

Prices Starting at $3.50 per Sq Ft

Our Process: 

1. The first step is to inspect and prep the floor removing any obstructions like protruding nails or staples that could get in the way of our process. 

2. We vacuum to remove all loose debris

3. Next we will tarp-up all cabinets, counter tops, curtains, wall-hangings etc. with plastic sheeting to protect your home. 

4. We will then remove all shoe moulding/quarter round to ensure we are able to sand right up to the baseboard. If we do not remove the shoe moulding it could cause a gap to form between the existing shoe moulding and the newly sanded floor. 

5. We will utilize our Dustless refinishing system to sand the floors using 3 to 4 different grits (depending on species) down to bare wood. Thoroughly vacuum/tack the floor.

6.  We use a process called water popping which opens up the grain to prepare for conditioner & stain.

7.  Depending on certain species we sometimes use a wood conditioner to prevent blotching and streaking ensuring uniform stain color. 

8. Apply the stain color of your choice and let dry.

9. Apply our sealer to bond with and close the grains. The sealer provides for a smooth and even application of polyurethane. We then lightly Sand, Vacuum/Tack the floor

10. Then we inspect the floor to make sure there are no streaks or blemishes left behind from the stain or sealer. 

11.  We then will apply 2 coats of our Premium Polyurethane (Gloss, Semi Gloss, Satin, Matte) - abrading, vacuuming/tacking in between coats to ensure adhesion and smooth texture.

12. Next we install new shoe moulding/quarter round of your choice (white or wood). The wood shoe moulding or quarter round can be stained to match the floor or trim! 

13. Lastly, we apply the last coat of our Premium Polyurethane! All of these steps create a durable, long lasting and beautiful floor! 

Note:  The gloss level will affect the appearance of your floor, but not its durability